Triaxial Load Cell 100kg 50kg 30kg 20kg 10kg 3-axis Load Cell Sensor
Tri-Axial Load Cell F3G is designed to measure force in Fx/Fy/Fz at the same time,each axis is able to measure force in both tension and compression direction with 0-100kg / 0-50kg / 0-30kg / 0-20kg / 0-10kg / 0-5kg / 0-3kg / 0-2kg eight rated measuring ranges to choose from.Very low profile design with total 26mm height makes F3G suitable for 3-axis force measurement where mounting space is limited.Typical applications for this 3-Axis Load Cell F3G are for example force exertion control in robotics, force simulators, automotive testing & controlling, industrial test benches, grinding force control, actuator operating force measurement and so on.
Ordering code of 3-axis load cell F3G
| Ordering code | Capacity | Material |
| Fx=Fy | Fz |
| F3G-20N | 20N | 20N | Aluminum alloy |
| F3G-20-20-30 | 30N |
| F3G-30N | 30N | 30N |
| F3G-30-30-50 | 50N |
| F3G-50N | 50N | 50N |
| F3G-50-50-100 | 100N |
| F3G-100N | 100N | 100N | Stainless steel |
| F3G-100-100-200 | 200N |
| F3G-200N | 200N | 200N |
| F3G-200-200-300 | 300N |
| F3G-300N | 300N | 300N |
| F3G-300-300-500 | 500N |
| F3G-500N | 500N | 500N |
| F3G-500-500-1k | 1kN |
| F3G-1kN | 1kN | 1kN |
Specifications
| Rated Capacity | Fx/Fy/Fz 20N / 2kg / 4.5lb 30N / 3kg / 6.7 lb 50N / 5kg / 10lb 100N / 10kg / 20lb 200N / 20kg / 45lb 300N / 30kg / 67lbf 500N / 50kg / 110lb 1000N / 100kg / 220lb |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Non-repeatability | ±0.1% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | <100N Aluminum alloy >50N Stainless steel |
| Cable | Ø6*3000mm 12-wire shielded cable |
| Wiring code | 4-wire connection for each axis |
Multi-axis force load cell F3G consists of 3 wheatstone full bridges,one in each channel to deliver mV/V output proportional to the applied force,the output range of F3G is normally within -15mV...+15mV, multi-channel load cell amplifier LC3A can be used to convert the mV signal into 0-5V / 0-10V / 4-20mA for easy signal processing.Taking F3G-500N and LC3A(-5-5V)-24V for example,the force-voltage relationship will be 0-500N load in Fx+/Fy+/Fz+ direction VS 0-5V output, 0-500N in Fx-/Fy-/Fz- direction VS 0-(-5V) output.
Triaxial Load Cell 100kg 50kg 30kg 20kg 10kg 3-axis Load Cell Sensor
Click here to download datasheet
|
|
Triaxial Load Cell 100kg 50kg 30kg 20kg 10kg 3-axis Load Cell Sensor Images
|
